| 厂家(产地) | 东莞 |
|---|---|
| 牌号 | 万里行 |
| 加工级别 | 热熔级 |
| 特性级别 | 高光泽 |
| 销售方式 | 自产自销 |
We are a factory, located in Dongguan, close to Guangzhou. We have over 2 year experience of producing PLA&ABS filament for reprap 3D printer. Now, we grow to have over 1000 squal meter site, 2 production lines, yield 10 tons each month, we have customers ,resalers and distributor all over the world. We are looking for cooperate partnership and distributor agent all over the world, welcome to inquiry and contact for further more info, thanks.
我们是工厂单位，地处东莞，毗邻广州。我们有2年生产3D打印塑胶耗材的经验。如今我们拥有超过1000平方米的厂房，3条生产线，月产30吨。客户，经销商和代理商分布于全世界各地。我们也在不断扩大和寻求合作伙伴和经销代理商，欢迎各界朋友咨询和联系。
ABS is commonly used in 3D printing, has the following characteristics:
ABS被广泛应用于3D打印行业，有如下特点：
(1) high strength, good toughness;
高强度，高韧性；
(2)density is small, when printing larger volume model lighter, save money;
密度小，单位重量体积大，打印较大模型而不需要耗费过多材料，节省成本；
(3) cost-effective, can be processed in wide range temperature;
材料成本低，加工温度范围广；
(4) softer than PLA;
比PLA较软；
(5) diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
直径标准3.0/1.75mm,误差范围+ /-0.1mm，圆度+/-0.05mm
(6) 1 kg /plastic spool packaging;
1公斤净重 塑胶盘包装；
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..
可应用于各种类型打印机，包括reprap mendel,makerbot,BFB 系列；
Our ABS filament grade :
我们的ABS塑胶条级别：
| ABS-H | ABS | ABS-M |
Natural color 材料本色 | Milk white 乳白色 | Milk yellow 乳黄色 | Clear 透明 |
Processing temperature 挤出问题 | 185 deg for 3mm, | 230 deg for 3mm | 230 deg for 3mm |
Odor 气味 | low smoke ,tasteless, 低烟，无味，室内打印良好 | white smoke, concentrated flavor ,not very good for indoor 稍有白烟，味道较重，室内打印情况一般 | Strong smell, not good printing indoor 味道较重，室内打印情况一般 |
Roundness 圆度 | +/-0.05mm | +/-0.05mm | +/-0.05mm |
Variety 直径范围 | +/-0.1mm | +/-0.1mm | +/-0.1mm |
water absorption 吸湿性 | Very low, no bubbles occur when printing even expose to air for over half a year 非常低，即使暴露空气放置半年都不会打印时产生气泡 | High, exposed to air for a period( like some days or shorter time) much bubbles printing at high temperature after the filament opened from seal packaging 吸湿性一般 | High ,easily absorb moisture, much bubbles when printing after expose to air for a short time 吸湿性一般 |
Surface gloss 表面光泽度 | Normal 一般 | Good 好 | Good 好 |
Strength ,hardness 强度和硬度 | Low, easily white dot when bending 强度和硬度一般，弯折时材料应力发白 | Strong ,no white dot when bending 强度和硬度好，弯折时一般没有应力发白 | Low, some time white dot occur when bending 强度和硬度一般，弯折时一般较少应力发白 |
stick to layer within layer 层与层粘接性 | very good 很好 | normal 好 | good 好 |
stick to heat bed ,heat bed 110 deg 对热床的粘接性 | Normal 一般 | good 好 | very good 很好 |
we have colors: 我们可以提供的颜色包括 ：
Clear /透明, Natural/本色, white/白, black/黑,red/大红, sky blue/天空蓝, dark blue/深蓝 , florescent green/荧光绿, dark green/草绿, florescent yellow/荧光黄, dark yellow/棕黄 ,orange/橙, purple/紫, pink/粉红, grey/灰, brown/棕, glow in dark /夜光系列 ，etc
ABS grade imported from Taiwan Chimei properties: ABS材料以台湾其美的747为基材进行改性：
Property 性能 | Unit 单位 | Test Method 测试方法 | Test Condition 测试条件 | ABS |
Tensile Strength 拉伸强度 | kg/cm2 | ASTM | 23℃ | 220 (22) |
Tensile Elongation 伸长率 | % | ASTM | 23℃ | 40 |
Flexural Strength 拉伸强度 | kg/cm2 | ASTM | 23℃ | 440 (43) |
Flexural Modulus 拉伸模量 | kg/cm2*104 | ASTM | 23℃ | 2.3 (2260) |
Izod 缺口冲击强度 | kg-cm/cm | ASTM | 23℃ | 11.0 (108) |
Vicat Softening 维卡软化点 | ℃ | ASTM | Annealed | 95 |
Heat Deflection 热变形温度 | ℃ | ASTM | Annealed | 88 |
Melt 熔体指数 | g/10 min | ASTM | 200℃×5Kg | 5.5 |
Residual Monomer 单位残余量 | ppm max. |
|
| 700 |
Molding 模具收缩率 | % | FCFC | 23℃ | 0.4~0.6 |
Specific Gravity 密度 |
| ASTM | 23℃/23℃ | 1.04 |
Flammability 燃烧级别 |
| UL-94 | FILE NO. | 1/16" HB NC |
